- YAMAKEN
- LH
- 2 Flutes Carbide End Mill Series
- 3 Flutes Carbide End Mill Series
- 4 Flutes Carbide End Mill Series
- 6 Flutes Carbide End Mill Series
- Carbide Ball Nose Series
- Corner Radius End Mills
- Carbide Roughing Series
- Carbide NC Spotting Drill
- Carbide Corner Rounding Cutters
- Cabide Center Drills
- Carbide Drills
- Carbide Percision Reamer
- Taper Flutes Carbide End Mills
- Carbide Micro Boring Tip Bars
- View All
- NACHI
- SHARP ONE
Novo Tooling Sdn Bhd
161-6, Jalan Fajar 1,
Taman Fajar 2, Jalan Bakri,
84200 Muar,
Johor, Malaysia.
161-6, Jalan Fajar 1,
Taman Fajar 2, Jalan Bakri,
84200 Muar,
Johor, Malaysia.
+6016-666 5358
+606-986 5358
+60166665358
Branch
No.5A, Jalan MJ 35,
Taman Merdeka Jaya,
75350 Melaka, Malaysia.
No.5A, Jalan MJ 35,
Taman Merdeka Jaya,
75350 Melaka, Malaysia.
Long Flute 2 Flutes Square End Mills
Previous | 3 / 6 | Next |
General Purpose :
High Speed Cutting :
High Speed Cutting :
ltem code | Outsite Diameter(d1) | Flute Length(l2) | Overall Length(l1) | Shank Diameter(d2) |
LH2EMA-010 | 1.0 | 5 | 75 | 4 |
LH2EMA-015 | 1.5 | 6 | 75 | 4 |
LH2EMA-020 | 2.0 | 9 | 75 | 4 |
LH2EMA-025 | 2.5 | 10 | 75 | 4 |
LH2EMA-030 | 3.0 | 15 | 75 | 4 |
LH2EMA-035 | 3.5 | 15 | 75 | 4 |
LH2EMA-040 | 4.0 | 20 | 75 | 4 |
LH2EMA-045 | 4.5 | 20 | 75 | 6 |
LH2EMA-050 | 5.0 | 25 | 75 | 6 |
LH2EMA-055 | 5.5 | 25 | 75 | 6 |
LH2EMA-060 | 6.0 | 25 | 75 | 6 |
LH2EMA-065 | 6.5 | 25 | 75 | 8 |
LH2EMA-070 | 7.0 | 25 | 75 | 8 |
LH2EMA-075 | 7.5 | 25 | 75 | 8 |
LH2EMA-080 | 8.0 | 30 | 75 | 8 |
LH2EMB-030 | 3.0 | 15 | 100 | 6 |
LH2EMB-040 | 4.0 | 25 | 100 | 6 |
LH2EMB-050 | 5.0 | 30 | 100 | 6 |
LH2EMB-060 | 6.0 | 30 | 100 | 6 |
LH2EMB-070 | 7.0 | 35 | 100 | 8 |
LH2EMB-080 | 8.0 | 35 | 100 | 8 |
LH2EMB-090 | 9.0 | 40 | 100 | 10 |
LH2EMB-100 | 10.0 | 40 | 100 | 10 |
LH2EMB-110 | 11.0 | 45 | 100 | 12 |
LH2EMB-120 | 12.0 | 45 | 100 | 12 |
LH2EMC-080 | 8.0 | 40 | 150 | 8 |
LH2EMC-100 | 10.0 | 50 | 150 | 10 |
LH2EMC-120 | 12.0 | 50 | 150 | 12 |
LH2EMC-160 | 16.0 | 70 | 150 | 16 |
LH2EMC-180 | 18.0 | 80 | 150 | 20 |
LH2EMC-200 | 20.0 | 80 | 150 | 20 |